PRO-687 DECO Travertino Plaster is a decorative lime-based plaster designed for bold interior finishes with a natural mineral appearance and a more rustic, architectural texture. Formulated using air lime, micronised marble and performance additives, it creates breathable, moisture-regulating surfaces while allowing a more expressive Travertino-style effect. It is well suited to feature walls and ceilings where a stronger decorative texture is required.

Intended Uses

PRO-687 DECO Travertino Plaster is designed for internal decorative applications on walls, ceilings and selected interior surfaces. It adheres well to mineral substrates such as plasterboard, fine mortars and prepared plaster surfaces, making it suitable for decorative residential and commercial interiors where a rougher, more rustic finish is desired. The original DECO data sheet identifies the XL finish as Travertino with a 0.7 mm grain size.

Why Choose PRO-687 DECO Travertino Plaster?

• Creates a bold Travertino-style finish
• Breathable and moisture-regulating lime-based formulation
• Suitable for feature walls, ceilings and selected interior surfaces
• Ideal for rustic, architectural decorative effects
• Suitable for residential and commercial interiors
• Creates a natural mineral appearance

Substrate Preparation

Surfaces must be clean, dry, stable and free from dust, grease, oil, loose material and any other contaminants that may affect adhesion. The substrate should be checked for flatness, and any significant irregularities, cracks or holes should be repaired before application. The substrate must be primed with PRO-684 DECO Lime Primer before the plaster is applied.

Product Preparation

PRO-687 DECO Travertino Plaster is supplied ready to use.

• Stir thoroughly before application
• Do not add water or other additives unless specifically recommended for the intended application

Application

PRO-687 DECO Travertino Plaster is designed for internal decorative finishes and can be applied using a spatula or trowel depending on the finish required. Recommended application thickness is 1mm to 3mm.

Application Conditions

Apply only when ambient and substrate temperatures are between 5°C and 30°C. Do not apply in unsuitable conditions or where temperature and site conditions may affect curing or finish quality.

Technical Data