EWI-010 Acrylic Render

EWI Pro's Acrylic Render will form a long-lasting, aesthetically-pleasing and protective barrier on your external walls. It is flexible and highly resistant to mechanical impact. This product is also great at holding vibrant colours and can be mixed into almost any shade (please call to enquire further about colour mixing for Acrylic Render). Acrylic Render is a polymer-modified, thin-coat render, used as a decorative finish to an EWI system. This product is available in grain size: 1.5mm. EWI-010 Acrylic Render is suitable for interior and exterior surfaces. However, we do not recommend using this product in thermal wall insulation systems that use hard mineral wool panels or on wet walls with a high level of technological moisture. For example, those made from fresh cellular concrete. With this in mind, we recommend using EWI-040 Silicone Silicate render in conjunction with our mineral wool insulation systems.

Application

You can easily apply EWI-010 Acrylic Render by hand or you can spray it onto a substrate. When applying Acrylic Render, use a notched trowel to apply the render to a thickness which corresponds with the grain size. When applying this product, ensure that you have enough workers on-site to be able to apply it to whole sections of the wall (rather than half sections). This prevents scarring where the sections meet.  To create an even, textured finish we recommend that you rub up against the surface of the render in circular motions using a plastic float.

Application Conditions

• Substrate primers: EWI-301 Water Based Primer,
• Basecoat primers: EWI-330 Mineral & Acrylic Primer
• Application temperature (air, substrate, materials): from +5°C to +25°C
• Colour range: available in thousands of colours
• Caution! When applying render to elevations with a large area, you should use colours with a brightness coefficient (diffuse reflection) of at least 20%. These coefficients are shown in the colour palette of EWI Pro plasters and paints.

Acrylic Render Coverage Rates

• 1.5mm – 2.4kg/m². One bucket should cover 9–10m²

This product is available in other grain sizes. Please call to enquire.

Acrylic Render Storage Conditions

Comes ready-to-use in a 25kg plastic tub. Store in a cool, dry place. Shelf life: up to 12 months from the date of manufacture. Please note: We do not accept returns on tinted items as the packaging seal is broken during the tinting process. Store in a cool, dry place away from direct sunlight and mix regularly. Colours from different batches may vary, to avoid inconsistencies mix tubs together prior to application.