4.5 out of 5 Stars on
SHOP OUR DEALS

Silicone Paint (EWI-005) – 5 Litres

Brands:EWI Pro

From £34.38 Excl. VAT

The EWI-005 Silicone Paint is a high-strength silicone based masonry paint. This versatile product can be used in both interior and exterior projects.

  • Internal/external use
  • Frost-proof
  • Vapour permeable
  • Hydrophobic
  • Resistant to algae and plant growth
  • For use with Mineral Render or as a standalone finish

 

Clear
x

EWI-005 Silicone Paint

The EWI-005 Silicone Paint is a high-performance masonry paint. This product is ideal for painting over an existing render as a way to refresh the facade and create a finish that looks brand new. It is also great for painting over our Mineral Render to seal the render in.

We suggest you apply the Silicone Paint 3-7 days after the Mineral Render has been applied to the substrate. However, this depends on weather conditions. This will ensure that a strong physical and chemical bond forms between the Mineral Render and the masonry paint.

Preparation

Before application, the surface of the substrate must be clean and dry. You should be sure to adequately protect any surfaces that you don’t intend to paint. Check that the paint is the requested colour. Mix Silicone Paint thoroughly within its container to ensure an even distribution of colour pigments. If using more than one tin of paint for the same surface, you should ensure that you match the batch numbers.

Application

Apply the masonry paint using brushes, rollers or spray equipment. Best practice when using a silicone-based paint is to apply the paint to the substrate in a continuous manner one wall/surface at a time. This will ensure that there are no visible drying lines where sections of paint meet. When used as a topcoat to our Mineral Render system, the masonry paint should be applied 3-7 days after rendering and at the latest 21 days after rendering, depending on weather conditions. When painting over the top of multi-layer render coats, the last layer must be 7 days old.

Paints with intense colours (reflection coefficient Y < 20%) should not be used for large facades; the resulting temperature and UV radiation in these conditions may reduce the durability of paint coats and may cause colour fading.

EWI-005 Silicone Paint Application Conditions

  • Application temperature (air, substrate, materials): from +5°C to +25°C
  • Number of coats required: 1
  • Drying time: approx. 12 hours at +20°C
  • Quantity to be used for single coats: about 150-250 ml/m² (depending on the absorptive capacity, substrate structure and application method)

EWI-005 Silicone Paint Storage Conditions

Shelf life: up to 12 months from the date of manufacture. Keep dry and in the original packaging at a temperature of +5°C to +25°C.

Weight 7 kg
Colour

, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Litre

,

Brand

EWIPRO

Reviews

There are no reviews yet.

Be the first to review “Silicone Paint (EWI-005) – 5 Litres”

Your email address will not be published.

You may also like…

  • Silicone Render (EWI-075) – 25KG

    From £64.90 Excl. VAT
  • Lightweight basecoat ewi269

    Lightweight Basecoat (EWI-269) – 25kg

    £12.62 Excl. VAT
  • Orange Fibreglass Mesh – (EWI-66645) – 50m2

    £46.08 Excl. VAT
  • Silicone Silicate Render (EWI-040) – 25kg

    From £58.92 Excl. VAT
  • Rendering Tape – Orange 48mmx50m

    £5.49 Excl. VAT
  • PVC Stop Bead – Mesh (6mm)

    £3.71 Excl. VAT
  • Aquabase (EWI-226) – 25kg

    £19.99 Excl. VAT
  • Premium Bio Silicone Render (EWI-076) – 25kg

    From £80.87 Excl. VAT
  • EPS Basecoat

    EPS Basecoat Adhesive (EWI-220) – 25kg

    £12.52 Excl. VAT
  • EWI-221 Winter adhesive

    Winter Adhesive (EWI-221) – 25kg

    £14.66 Excl. VAT
  • Render Corner Bead – No Nose (2.5m)

    £2.49 Excl. VAT
  • Nano Drex Silicone Render (EWI-077) 25kg

    From £132.16 Excl. VAT