PRO-688 DECO Natural Wax Finish is a protective finishing treatment designed for decorative lime plasters on interior surfaces. Made from natural beeswax and lime water, it helps enhance durability and appearance while maintaining the breathable nature of the finish beneath. Once applied, it forms a hydrophobic protective layer that helps repel moisture while creating a soft-touch surface with a subtle satin sheen.

Intended Uses

PRO-688 DECO Natural Wax Finish is designed to protect and enhance decorative interior lime finishes, particularly lime-based stuccos such as Venetian plaster and other mineral decorative coatings. It is suitable for porous interior surfaces including walls, ceilings and selected decorative elements where additional protection and visual enhancement are required. It helps improve durability and surface resistance while preserving the breathable characteristics of lime-based systems.

Why Choose PRO-688 DECO Natural Wax Finish?

• Helps protect and enhance decorative lime finishes
• Forms a hydrophobic layer to help repel moisture
• Creates a soft-touch finish with a subtle satin sheen
• Helps improve durability and surface resistance
• Preserves the breathable nature of lime-based systems
• Suitable for interior walls, ceilings and decorative elements

Substrate Preparation

Surfaces must be clean, dry, sound and fully cured before application. Remove any dust, dirt or surface contamination that may affect adhesion or the final appearance. The background should be stable, well bonded and sufficiently dry before treatment.

Product Preparation

PRO-688 DECO Natural Wax Finish is supplied ready to use.

• Stir thoroughly before use
• Do not dilute unless specifically required for the intended use

Application

Apply in thin, even coats using a brush. After approximately 30 to 60 minutes, burnish the surface using a clean wool cloth or suitable polishing pad. Additional coats may be applied depending on the absorbency of the surface and the level of finish required.

Application Conditions

Apply only when ambient and substrate temperatures are between 5°C and 30°C. Do not apply in unsuitable conditions or where site conditions may affect drying or finish quality.

Technical Data