EWI-66640 Fibreglass Mesh – 50m2 coverage

£36.55

In stock (can be backordered)

Share this

A strong and flexible fibreglass reinforcing mesh, ideal for giving strength and flexibility to external wall insulation and render systems – the fibreglass mesh ensures you will have a crack-free render system for years to come!

The fibreglass is coated with acrylic acid copolymer liquid, which makes it resistant to water, alkali and age damage.

  • Each roll is 50m long by 1m wide (50m2 coverage)
  • The fibreglass mesh is 150g/m2
  • The fibreglass mesh is strong and flexible
  • Gives strength to the system

EWI-66640 Fibreglass Mesh (50m2 coverage) is a high quality, heavy-duty grade fibreglass reinforcing mesh, which is coated with acrylic acid copolymer liquid making it resistant to stress and strain.The mesh has high tensile strength, good dimensional stability, good elasticity and corrosion resistance.

Using Fibreglass Mesh with Basecoat adhesives

This strong fibreglass mesh is an integral component of both render and EWI Systems. The strong and flexible fibreglass mesh is embedded with the cement based basecoat layer (either EWI-220 EPS Basecoat or EWI-225 Premium MW Adhesive)  – this ensures the final render / solid wall insulation system is both strong (to withstand impacts) but also flexible so it will be able to withstand natural building movements that occur during the different seasons.

The fibreglass mesh can also be used in areas that need additional strengthening – for example stress patches can be cut from the roll (300mm x 200mm) that are put 45 degrees to each corner of an opening. In traditional sand and cement areas, these areas are particularly likely to crack. The addition of a stress patch in these areas ensures the system will last crack free long into the future.

When using the fibreglass mesh, ensure that each strip overlaps the last when embedding it within the basecoat adhesive or premium adhesive. There is a black marker printed on the mesh that indicates the overlap required. You can also ‘double-mesh’ if an area requires particular strengthening above and beyond our normal EWI / render systems. In order to do this, initially embed the mesh in vertical strips down the wall. Then embed the second layer of mesh at 90 degrees to this. In order to embed both layers of EWI-66640 fibreglass mesh within the adhesive you may need to make the basecoat layer slightly thicker – e.g. 8mm instead of the recommended 6mm.

Other uses of fibreglass mesh

Obviously the primary purpose of the fibreglass mesh is to be used within the basecoat layer of either render systems or EWI systems, but it can be used to bridge cracks externally/internally or for giving extra strength to floor screeds as well as plastered ceilings.

The EWI-66640 fibreglass mesh is coated with acrylic acid copolymer liquid, making it water, alkali and age resistant.

Technical Specs of our Fibreglass Mesh

  • Length: 50m
  • Width: 1m
  • Area per roll: 50m2
  • Weight: 150g/m2
  • Colour: White
  • Make: EWI Pro

 

 

 

SKU: EWI-66640
Weight 8 kg

Reviews

Write a review

There are no reviews yet.

Browse product categories