Elabrick Mineral Brick Slips - Sahara 215 x 65mm (UK Size) Brick Slip - 215 x 65mm
UK Size
Brick Slip size: 215 x 65mm
Corner Brick Slip size: 215/102 x 65mm
Elabrick Sahara Mineral Brick Slips are lightweight mineral brick slips designed to create a warm, natural brick appearance without the weight and complexity of conventional masonry. The Sahara colour features warm orange-red tones, making it ideal for welcoming façades, feature walls, renovation projects and external wall insulation systems.
This product is available in two variants: Brick Slip and Corner Brick Slip. The standard brick slips are used across flat wall areas, while the matching corner brick slips are designed to create a clean, continuous finish around external corners, window reveals, openings and façade edges.
Key Benefits
- Warm orange-red brick appearance
- Available as Brick Slip and Corner Brick Slip variants
- Brick Slip size: 215 x 65mm (UK Size)
- Corner Brick Slip size: 215/102 x 65mm
- Suitable for interior and exterior applications
- Lightweight and easy to handle
- Ideal for façades, feature walls, renovations and EWI systems
- Can be installed on flat and gently curved suitable substrates
- No separate pointing required
- Low-maintenance, vapour permeable and colourfast
Warm Orange-Red Brick Appearance
The Sahara finish features warm orange-red tones that create a natural and welcoming brick effect. It is well suited to residential façades, renovation projects, feature walls and interiors where a warmer, traditional brick appearance is required.
Size & Variant Options
| Variant | Size | Coverage | Use |
|---|---|---|---|
| Brick Slip | 215 x 65mm | 0.94m² | For flat wall areas, façades, feature walls and external wall insulation systems. |
| Corner Brick Slip | 215/102 x 65mm | 2 linear metres | For external corners, window reveals, openings and façade edges. |
Suitable for Interior and Exterior Use
Elabrick Sahara Mineral Brick Slips can be used on both internal and external walls. Outdoors, they are suitable for exterior façades, refurbishment projects and external wall insulation systems. Indoors, they can be used as an alternative to plaster or wallpaper to create decorative feature walls and warm brick-effect finishes.
Lightweight and Easy to Install
With an approximate thickness of 4mm and a weight of around 4kg per m², Elabrick mineral brick slips are lightweight and practical to handle on site. They can be installed directly onto suitable stable substrates without the need for structural modifications, making them suitable for renovation, new-build and external wall insulation projects.
Application
Apply Elabrick adhesive mortar to a clean, stable and movement-free substrate, then press the brick slips into the fresh mortar bed. Highly absorbent surfaces may require preparation with Elabrick Primer before installation. The adhesive mortar provides the bond and also forms the joint colour, so separate pointing is not required. Once the slips are positioned, smooth the joints with a damp brush to create a neat and consistent finish.
