WKRET-MET – Metal Pin Hammer Fixing
Metal Pin Hammer Fixings (metal pin, plastic body) can be used on a variety of thicknesses of insulation. The metal mechanical fixing is made from a metal pin with plastic bodies, meaning that they reduce thermal bridging within the system. The metallic rods are hammered in, giving the system stability.
Sizing and Quantities
The Metal Pin Hammer Fixings have an 8mm/10mm-wide metal core. The lengths of fixings available are:
- 8mm x 95mm (200 fixings per box)
- 8mm x 115mm (200 fixings per box)
- 8mm x 135mm (200 fixings per box)
- 8mm x 155mm (200 fixings per box)
- 8mm x 175mm (200 fixings per box)
- 8mm x 195mm (200 fixings per box)
Available upon request, please give us a call!
- 10mm x 220mm (100 fixings per box)
- 10mm x 260mm (100 fixings per box)
Intended Uses
The Metal Pin Hammer Fixing is used to fix the insulation boards to the substrate. With a metal rod and plastic body, they keep thermal bridging down to a minimum, meaning that the system maintains its insulating qualities.
These mechanical fixings are suitable for concrete, brick and other blockwork. If in doubt about the suitability of the substrate, it is recommended a pull test is carried out to ensure it is strong enough to support an EWI system.
Alan Stewart –
These are the most reliable fixings we have used for ewi. They never snap (as metal) but the plastic bit protects against thermal bridging. Would always recommend these if in doubt!
Wes Plant –
Use these metal pin fixings on every ewi job. cause they are metal pin, they never snap and they hold the boards nice and tight. Never any issue with them, great product.