Premium Basecoat (EWI-225) – 25kg


5.00 out of 5 based on 4 customer ratings
(4 customer reviews)
From £16.54

In stock

Quantity Price (incl VAT)
1 - 9 £20.04
10 - 39 £19.04
40+ £16.54
  • High strength
  • Dual-purpose
  • Breathable
  • Waterproof
  • Frost-resistant
  • High elasticity

Premium Basecoat

Premium Basecoat is breathable, high strength and durable. EWIPro’s finest basecoat adhesive, it is used for a range of solutions for example as a basecoat/adhesive for Mineral Wool, Kingspan K5 and Wood Fibre insulation boards or as a render-only solution onto a range of substrates including render carrier board. The adhesive is white due to the presence of white Portland cement – making it stronger than other basecoat adhesives (EWI-220 and EWI-210). Once the basecoat has dried it provides an incredibly strong and flexible reinforcement layer; we therefore highly recommend this product for ‘render only’ systems. 

Premium Basecoat can be used for two purposes:

  • An adhesive used to create the reinforcement basecoat layer in render only or Mineral Wool, EPS, Kingspan K5 and Wood Fibre EWI systems
  • An adhesive used to fix Mineral Wool (Rockwool) to a substrate.

Premium Basecoat is prepared in the same way regardless of whether it is being used as a basecoat or an adhesive for fixing the Mineral Wool insulation boards to the substrate. The Premium Basecoat comes as a dry mix in 25kg so needs to be mixed with clean, cold water ( >5.9 litres) prior to use. We suggest filling a large bucket with the correct quantities of water prior to adding the dry basecoat mixture. Once the basecoat has been added to the water, it needs to be mixed using a paddle mix until an even consistency mortar is produced. Once the product has been mixed sufficiently, leave the bucket for 5-10 minutes and then remix using the paddle mix before the adhesive is ready for use.

Application of Premium Basecoat

If using the Premium Basecoat for the basecoat layer, apply the basecoat using a 10mm  notched trowel to the substrate. Then embed overlapping pieces of Fibreglass Mesh – the mesh should sit within the middle of the basecoat layer. Once embedded the basecoat layer should be 6mm in total.

If using the Premium Basecoat to fix insulation boards to the substrate, the product can either be applied to the whole surface of the insulation board using a notched trowel or applied to the perimeter of the insulation board with 3 dabs across the middle.

  • Primer: EWI-301 or EWI-310 if a key is required
  • Application temperature (air, substrate, materials): from +5°C to 25°C
  • Time of usability after mixing with water: approx. 2 hours (temp. +20°C)
  • Water mix proportions: approx. >5.9 litres of water per 25 kg of dry mix
  • Quantity to be used:
    • Fixing insulation panels of foamed polystyrene and reinforced layer on foamed polystyrene: approx. 4-5 kg/m2
    • Fixing insulation panels of Mineral Wool and reinforced layer on Mineral Wool: approx. 5-6 kg/m2

Storing Premium Basecoat

Comes in powder form in a 25kg paper bag. Store in a cool, dry place. Avoid ingress of water. Shelf life: up to 12 months from the date of manufacture.

Premium Basecoat Coverage Rates

  • Basecoat/Adhesive – 25kg/2.5m2
  • Render Only (Brick/block) – 25kg/2.5m2
  • Render Only (RCB) – 25kg/3-3.5m2
  • Render Only (Insulation) – 25kg/3-3.5m2
SKU: EWI-225
Weight 25 kg

4 reviews for Premium Basecoat (EWI-225) – 25kg

5.00 out of 5
Write a review

  1. F Baumann

    Has to be the best adhesive, comparable to the StoArmat Novo or the StoArmat Levell basecoats. Trust me, I have installed Sto, Baumit and other German systems.

    A 25kg bag can typically do 5 to 6 metres for us of the basecoat layer. You can mix it according to instructions but we tend to use our own judgement through experience. The powder is cream and when mixed with water comes nicely when applied with the trowel.

    It can be used for mineral wool and eps, but I just use it on eps systems all the time, but I dont waste the ewi-225 for sticking boards, I tend to use the ewi-220.

  2. Simon Grade

    Great gear this. 6-8mm on top of insulation boards with mesh and render goes on great too.

  3. Jayesh

    Use the premium adhesive on our last job. It is great. would recommend. It is very strong, mixes well and goes on easy.

  4. Steven

    Good as a basecoat for silicone render systems, gives a durable result.

Browse product categories