- Can You Remove Dried Render?
- How to Remove Dried Render from Windows
- Step 1: Apply EWI Pro Clean Render Remover
- Step 2: Give It Time to Work
- Step 3: Keep the Area Wet
- Step 4: Agitate the Render
- Step 5: Repeat Where Necessary
- How to Remove Render from uPVC Window Frames
- How to Remove Silicone Render from uPVC
- What About Dried Monocouche and Basecoat?
- Why Use EWI Pro Clean Instead of Just Scraping the Render Off?
- Less Time Spent on the Final Clean
- Designed Specifically for Render Products
- No Mixing Required
- Useful Throughout the Job
- What Surfaces Can EWI Pro Clean Be Used On?
- When Should You Clean Render Spillages?
- 1L or 5L Render Remover?
- 1L Render Remover
- 5L Render Remover
- Don't Let Render Spillages Ruin the Finish
Finished a rendering job and discovered you've somehow managed to leave dried render all over the windows, frames or surrounding surfaces?
Brilliant.
Even with careful masking and preparation, silicone render, monocouche, basecoat and primer have a remarkable talent for ending up somewhere they absolutely shouldn't. And once that render has dried, what looked like a tiny bit of mess can suddenly become a rather bigger clean-up job.
Before you reach for the scraper and start attacking the window, there's an easier way.
EWI Pro Clean – Render Remover is a ready-to-use cleaning solution designed to break down unwanted render residue and help lift it from surfaces including glass, uPVC, plastic, metal and concrete.
So, if the render has dried, don't panic. It may look stubborn, but it's not necessarily staying there forever.
Can You Remove Dried Render?
Yes. Dried render can be removed, although, naturally, it's much easier when you catch it before it's had the chance to fully harden.
How difficult the clean-up is will depend on a few things:
-
The type of render
-
How long it's been left to dry
-
How thick the spillage is
-
The surface underneath
-
The size of the affected area
Silicone render, monocouche and basecoat can be particularly irritating once they've dried, especially if you're relying on nothing more than a cloth and some determination.
This is where EWI Pro Clean – Render Remover comes in.
Its specialist formulation uses nano-energy cells that penetrate the render residue and help lift it away from the surface, reducing the amount of manual cleaning required.
In other words: let the product do some of the hard work before you start doing it yourself.
How to Remove Dried Render from Windows
Windows are one of the classic places for render splashes to appear.
You can mask, cover and protect everything in sight, and somehow a little bit of silicone render, basecoat or primer still finds its way onto the glass.
Once it's dried, the temptation is obvious: get the scraper out and start scraping.
But before you do that, it's worth loosening the residue with a specialist render remover first. It can make the whole process considerably less of a battle.
Step 1: Apply EWI Pro Clean Render Remover
Spray EWI Pro Clean – Render Remover directly onto the affected area.
It's ready to use straight from the container, so don't dilute it with water.
No measuring. No mixing. No chemistry experiment required.
Step 2: Give It Time to Work
For general cleaning, leave the Render Remover on the residue for approximately one minute.
Got something more stubborn?
For heavier dried deposits, allow the product to work for up to 20 minutes.
Exactly how long you'll need will depend on the type and severity of the contamination.
Step 3: Keep the Area Wet
While the product is working, try to keep the treated area wet.
This becomes particularly important in warm or windy conditions, where the product can begin to dry before it's finished doing its job.
If that happens, simply apply more product as needed.
Step 4: Agitate the Render
Once the Render Remover has had time to penetrate the residue, agitate the area using a suitable cleaning implement, such as a cloth or appropriate brush.
The keyword here is suitable. Choose a cleaning method that's appropriate for the surface underneath, particularly when you're working around glass, uPVC or other easily marked materials.
Step 5: Repeat Where Necessary
Some render deposits are going to put up more of a fight than others.
If you're dealing with a heavy or older deposit, you may need more than one application.
Simply reapply the product, allow it to work and repeat the cleaning process until the unwanted residue has been removed.
Not everything disappears at the first attempt. That's life.
How to Remove Render from uPVC Window Frames
Dried render on uPVC can be particularly frustrating.
The last thing you want to do is attack the frame with an aggressive scraper and discover you've replaced a bit of dried render with a collection of scratches.
EWI Pro Clean – Render Remover is suitable for use on uPVC, making it useful for cleaning window frames and uPVC cladding after rendering work.
Apply the product directly to the render spillage, allow it to work and gently agitate the residue using a suitable cloth or cleaning tool.
Customer reviews of EWI Pro Clean have specifically highlighted its use for removing dried silicone render and monocouche from uPVC and window areas.
For installers, that makes it a useful product to have ready for the final clean-down, rather than relying entirely on mechanical removal and hoping for the best.
How to Remove Silicone Render from uPVC
Silicone render is designed to create a durable finished façade.
Excellent when it's where you want it.
Slightly less excellent when it's dried onto a uPVC window frame.
EWI Pro Clean has been formulated specifically to break down silicone render residue, making it useful for cleaning areas including:
-
uPVC window frames
-
Window sills
-
uPVC cladding
-
Glass
-
Plastics
-
Metalwork around the façade
And because it can be used on both wet and dried render, you can keep it nearby throughout the installation, whether you're dealing with a fresh splash or discovering a stubborn patch during the final inspection.
What About Dried Monocouche and Basecoat?
Silicone render isn't the only thing EWI Pro Clean can deal with.
It can also be used on cementitious products, including:
-
Monocouche render
-
Basecoats
-
Other unwanted cement-based residues
If the deposit is particularly thick or has been left to fully harden, it may need a little more time and possibly more than one application.
For heavy soiling, allow the product to work for up to 20 minutes, keeping the affected area wet before agitating the residue.
A little patience here can save a lot of unnecessary scraping later.
Why Use EWI Pro Clean Instead of Just Scraping the Render Off?
Sometimes mechanical removal is unavoidable. That's fine.
But going straight in with a scraper or abrasive tool isn't always the cleverest first move. You could end up creating more work or, worse, marking the surface underneath.
Using EWI Pro Clean – Render Remover first helps break down the unwanted material before you start agitating it.
For installers, there are a few obvious advantages.
Less Time Spent on the Final Clean
Render clean-up has a habit of eating into your time, particularly when dried material has built up around several windows.
A specialist render remover can help speed up the process and make those final clean-down jobs considerably less painful.
Designed Specifically for Render Products
A general-purpose cleaner might be perfectly good at dealing with everyday dirt.
Dried render, however, is playing a different game.
EWI Pro Clean has been formulated specifically for unwanted render, primers, basecoats and cementitious products.
No Mixing Required
EWI Pro Clean is supplied ready to use.
No measuring. No diluting. No standing around wondering whether you've got the mixture right.
Just apply it to the affected area and get on with the job.
Useful Throughout the Job
Because it works on both wet and dried render, installers can use it throughout the installation.
Fresh splash?
Deal with it.
Spotted dried residue during the final clean?
Deal with that too.
One less thing to worry about.
What Surfaces Can EWI Pro Clean Be Used On?
EWI Pro Clean – Render Remover is suitable for use on a wide range of surfaces, including:
-
Glass
-
uPVC cladding
-
Plastic
-
Stainless steel
-
Metal
-
Concrete
-
Ceramic
-
Wood
-
Rubber
-
Vinyl flooring
-
Safety flooring
-
Canvas
That's particularly handy on rendering projects, where the work area tends to contain several different materials, all of which have somehow become potential targets for render splashes.
If you're working on a particularly sensitive or unfamiliar finish, check suitability before treating a large area.
When Should You Clean Render Spillages?
The sooner you deal with unwanted render, the easier the clean-up is likely to be.
Spot a splash while you're still rendering?
Deal with it before it has fully hardened, and you'll probably save yourself some time later.
But realistically, you won't always notice every little bit straight away.
You're busy rendering. There are tools everywhere. Someone is asking you something. And that tiny splash you didn't see has quietly decided to become tomorrow's problem.
Fortunately, EWI Pro Clean works on both wet and dried render, so it can still be used when those spillages only reveal themselves during the final inspection.
Keeping a render remover on site means you're prepared for both.
1L or 5L Render Remover?
EWI Pro Clean – Render Remover is available in 1L and 5L containers, depending on how much cleaning you expect to be doing.
1L Render Remover
The 1L option is ideal for:
-
Smaller rendering jobs
-
Minor spillages
-
Occasional clean-up
-
Keeping in the van for touch-ups
5L Render Remover
The 5L container may be more suitable for:
-
Professional renderers
-
Regular use
-
Larger projects
-
Multiple elevations
-
Bigger clean-down jobs
If you're regularly installing silicone render, monocouche or external wall insulation systems, having a larger supply on hand can save you from turning a relatively small spillage into a much bigger problem.
Don't Let Render Spillages Ruin the Finish
You've spent all that time getting the render finish looking right.
The last thing you want is for the customer to notice dried render splashed across the windows or uPVC when they come to admire the finished job.
EWI Pro Clean – Render Remover gives installers a purpose-made solution for removing unwanted silicone render, monocouche, primers and basecoats from a wide range of common site surfaces.
Apply it directly to the affected area, allow it time to penetrate the residue, and agitate with a suitable cleaning implement.
For light contamination, this may take around a minute. For heavier dried deposits, allow up to 20 minutes and repeat the process where necessary.
Whether it's a quick touch-up or the final clean-down of a complete elevation, having the right render remover on site can save you a fair bit of unnecessary graft.
Â