RAWLPLUG – Metal Hammer Fixing (RWL-R-TFIX-8M)

RAWLPLUG – R-TFIX-8M Metal Hammer Fixing is a versatile hammer-in facade fixing offering quick, easy and precise installation in all substrates (categories A, B, C, D and E) thanks to its unique sleeve compression zone. The fixing has an increased head diameter, enabling centric hammer driving and improved installation comfort. The additional steel nail offers a reduced point thermal transmittance, decreasing facade heat losses. The fixing’s plate stiffness (value 1.0 kN/mm) is of excellent quality, ensuring a smooth elevation surface and stable insulation system. All the components are pre-assembled, saving time and labour.

Applications

The R-TFIX-8M Facade fixing with metal nail is approved for application on:

• External Thermal Insulation Composite Systems (ETICS)
• Polystyrene (EPS) boards
• Mineral wool (MW) boards
• Polyurethane (PU) boards
• Cork boards
• Light wood wool building boards

Intended Uses

R-TFIX-8M Facade fixing with metal nail is approved for use in all substrate categories (see below. With its unique sleeve compression zone and high steel nail over-mould, it offers reduced point thermal transmittance which decreases facade heat loss. The categories include:

• Concrete C12/15-C50/60 (Category A)
• External wall panel of concrete C16/20 – C50/60 (Category A)
• Solid Brick (Category B)
• Solid Sand-lime Brick (Category B)
• Hollow Sand-lime Brick (Category C)
• Vertically perforated clay block (Category C)
• Reinforced components of lightweight aggregate concrete (Category D)
• Aerated Concrete Block (Category D)
• Hollow Lightweight Concrete