10mm Hammer Fixing with Plastic Pin & Short Expansion Zone - 70mm
£28.01
Incl. VAT
£28.01
Incl. VAT (regular price)
Please note: This product has a slightly longer lead time. Our team will notify you with an estimated delivery date.
Reviews & Ratings
Manjit
02.11.2025
Good for thermal bridge on EPS. Solid, but rotary-only drilling is strict on hollow block.
Mikas
30.10.2025
Not bad. AAC set solid, but fixing flush wasn't instant.
Bimal
12.09.2025
properly fast install. Pin's strong and seats dead flush with the insulation. Saved me time. Worth the money, spot on.
Dave
04.09.2025
Best hammer fixings on the market period. Went in a doddle amazing grip in concrete and saves loads of drilling effort. Proper job.
Hafuz
17.08.2025
Proper job. Dead easy hammer-in and saved me loads of drilling effort. Zerp thermal bridging from the pin, and it felt rock solid on AAC blocks.
Helen
16.07.2025
Brill fixings. Fast install they seat flush zero fuss.
Stuart
15.06.2025
Amazing! ETA-rated. Good graft in concrete A. Expansion zone did save some time. Pin felt stiff, but you just sort it with a heavier hit.
lEE
14.05.2025
Ace quailty, quick to fix, deadline sorted.
ANDREW
04.05.2025
Saved loads of time on the EWI fix. Pin never snapped, anchorage felt sound and it sits perfectly flush.
casey
25.04.2025
Brill! Sales agent confirmed EWI spec quick.
matthew
24.03.2025
pin breaks easy and the short expansion zone means half them fixings just spin out. Absolute rubbish, mate.
Lee
26.02.2025
Proper job on concrete, pins didn't snap! Quick fit, tidy.
Marius
06.02.2025
Brilliant thermal performance. Pins are super durable and sat flush easy.
Ryan
28.01.2025
Cracking fix dead easy to install. Saved us time proper quick.
Alistair
16.01.2025
held firm in the AAC block. Not half bad fixings at all.
MATT
13.01.2025
Nailed it!
Dominic
20.12.2024
Great stuff! Way quicker than old metal pins sits perfectly flush, feels rock solid.
van
23.11.2024
Hammered in quick no breakages. Gave a perfect flush finish. Held solid even in Cat E blockwork. Spot on.
Phil
21.11.2024
Pin held firm in the concrete. Sits dead flat, proper job, nothing like that cheap old gear.
mike
20.11.2024
Decent kit! GFRP pin felt seriously robust, hammered straight in. Washer sat flush spot on. Fast job, no snags. Worth paying for, saves hours.
Joe
16.09.2024
Proper solid. Pins didnt snap. Sorted.
Nigel
21.07.2024
Didn't snap once! Fast fix and the washer sits perfectly. Saves hours.
Alistair
15.06.2024
Brill bit of kit. Sorted.
Shaz
07.05.2024
Brill! Solid, flush finish.
Chulaluck
22.03.2024
Used these on AAC and concrete. Short expansion zone saves loads of effort. Sits dead flush first go. No heat bleed.
Matthew
01.11.2023
Right easy job. Proper solid hold.
Jan
06.09.2023
Sound fixing, glass-fibre pin is strong. Fast set with the short zone, dead easy. Sat flush on the board, perfect for the ETA specs we needed.
Chris
30.07.2023
Dead on fixings. Slapped 'em into dense concrete, hammer action was quick as anything, proper fast installation, felt completely secure against wind load. Value is brilliant for a plastic pin, didn't snap any.
Only dropped a star 'cos I had to pull out my spare pin driver near the end. And you always wonder if the thermal bridging is *truly* the lowest possible compared to specialist kit, but for this price? Sorted.
Gillian
09.07.2023
Flew in quick. Pin is proper strong. Dead flat finish, saves the thermal bridge faff. Cracking kit.
Thomas
01.06.2023
Proper solid and dead easy to hammer.
Kenneth
16.05.2023
Spot on for EPS. Didn't bend and pins sat flush.
tHOMAS
11.05.2023
70mm fix spot on. Just wisjh qty was higher.
Roman
03.05.2023
Good staple for EPS. ETA spec is sound; glass-pin limits cold-bridge. Setting depth needed too many checks. Still solid kit.
Keith
17.03.2023
Rock solid bhold. Top quality.
Matthew
09.03.2023
Good stable fix and fast installation using the hammer action, ETA info was spot on for my EPS boards. The glass-fibre pin feels proper robust. Docked a star because gauging the embedment depth was difficult and wish they did a 120mm size in this range. Bit annoying the box was short on units.
gianni
05.03.2023
Hammer fixings are cracking! Fast hammer-in installation on AAC and seats dead flush. No need for slow, pricey screw fixes. Sound.
Darren
04.02.2023
Good bit of kit. Quick install & low thermal bridging compared to metal. Snapped a couple pins forcing it on site, and one head had a tiny fault, but hold is solid.
purcell
20.01.2023
brilliant fix. Less drill depth & the GFRP pin held tight in the blockwork.
Richard
07.01.2023
Absolute liberty with this lot. box sed 200 units but we counted twenty fixings short for the run. wasted half a bloody hour sorting it out team stood there waiting for kit they thought they had. you cant trust the packaging Qty so the ETA cert is probably a load of pish two. shudda paid a bit more and got the 250 rawlplugs. now im forced to stop the job and run back to the yard. not worth the 'saving'. shocking. never agane
Jurgest
26.12.2022
Short expansion zone is brilliant. Sits perfectly flush!
Nick
24.12.2022
no snags or snaps. Flush seating is spot on.
Kevin
04.11.2022
Spot on fixings. Less drilling thanks to the short zone & the ETA rating gave peace of mind for the inspector. Job done properly.
Tristan
14.08.2022
Spot on. Glass-fibre pin is proper solid zero snags. Sits flush, saves loads of labour time. Will always use these.
Kristian
16.01.2022
Spot on. Short expansion zone works good for drilling my solid brick substrate and the glass-fibre pin held proper tight. Dead flush finish saved me faffing about.
Andrea
23.10.2021
Held fast, job sorted.
Sherban
19.10.2021
Super fast hammer-in and sat flush every time, even in solid brick. Amazing stuff.
Rares
26.09.2021
Pin is SOLID, much quicker job on the AAC. Fits perfectly.
Sebastian
17.09.2021
Top kit. Fixed solid!
Guy
15.07.2021
Fixing holds EPS fine. Looks cheap & I got sleeves with minor damage, plus bad delivery. Performance is just average, to be fair.
Jaroslaw
22.05.2021
Rock solid on the concrete no breakages and fixed fast. Proper chuffed with the flush finish, saved us a massive headache on labour!
Marianne
10.03.2021
Sot on for EWI.
Warren
28.11.2020
Sound, pins are dead tough.
Mark
11.06.2020
Solid EPS fixings. The short expansion zone speeds drilling massively on all substrates. Shame about the slightly awkward head for skimming. Had two pins break too.
Saul
01.05.2020
Less drilling, pins seat flush every time. Proper solid fix. Brill value.
Goran
04.04.2020
Hammer action works good, saved time on the job mate.
Mihai
28.03.2020
Just fitted. Brill kit. Great price.
Martynas
24.01.2020
Proper easy to install on the EPS. Flush finish is spot on quick fit. Took a star off purely for the logistics: ordered a big batch and ended up with a mountain of unnecessary little boxes to unpack. Solid kit otherwise.
Lukasz
08.12.2019
Worked OK mostly but pins snapped during installation. Bit shy on load testing data.
siva
13.11.2019
solid kit. Less time drilling into EPS. Need a wiggle for perfect flush finish.
Bella
11.10.2019
Spot on fixing, grips the concrete perfect. Brill.
Adam
05.10.2019
Proper solid EWI fixing and a genuine time saver on site.
Go-to fixings for EPS sound as a pound. That short expansion zone is bang on genuinely cut down the drilling effort and time needed amazing.
GFR pin stopped the snapping—none of the breakages you get on the cheap rubbish. Hammered in quick. Got a perfect flush finish every time too.
Held firm in Cat A and even the lightweight aggregate (Cat D). Really solid holding power. Delivery arrived earlier than expected. Top notch anchor.
Andrew
18.09.2019
FIXED! Feels SOLID.
J-J
22.08.2019
Super speedy job! Solid fix on concrete and AAC. Zero pins snapped.
Cristian
31.07.2019
Sound bit of kit. Pins never shattered hammering into concrete. Job done fast sitting flush. Worth the price.
Christine
25.05.2019
Solid for EPS and brick, fixed fast. But a couple needed hard tapping to sit dead flush.
Darren
22.05.2019
Hammer fixing is bang on. Speed installation was awesome always a flawless flush fit!
Brandon
02.04.2019
Fixings hold EPS tight. Annoying the head isn't reliably flush as advertised. Means extra skimming work but they are solid. iWll buy again.
Khaled
07.03.2019
Fantastic esult!
Shang
06.03.2019
dead quick for EWI. Gives a proper flush, but needs a solid smack to seat.
Sam
15.02.2019
Simply the best fix I've used. Fast into concrete and AAC, zero thermal issues. Proper solid! Just box 'em in 250s next time please.
Gerald
06.02.2019
Top quality gear. Zero snapping issues on concrete. Short expansion zone makes install dead quick. Sorted.
Ryan
16.01.2019
Cracking fixings. Hammered straigbt in, pins didn't snap, and dead flush.
Adam
16.12.2018
rock solid EWI fix
Marcus
17.11.2018
Bril!
Paul
06.11.2018
Spot On!
Dave
27.10.2018
Short expansion zone is bang on. Super fast dead tidy finish.
Assad
03.09.2018
Held fast on AAC and wind load is sorted. Solid quality fixing shame it
’s a bit pricey.
Ryan
23.08.2018
Absolute shambles. Took huge force to seat (wrong size arrived anyway!) then the plastic pin snapped twice. Week later in concrete they're already visibly lifting. Rubbish quality.
Adam
29.07.2018
Pin didn't snap anchored quick.
Wendy
22.06.2018
Short expansion was spot on. Highly rec.
Jamie
16.06.2018
Spot on!
Paul
27.04.2018
dead solid fixin's. Drove home easy, even in block. Finish is bang on, proper good job done quick.
Grace
12.12.2017
gF pin didn't snap on the blockwork. Sound!
Shahzeb
02.12.2017
These anchors are spot on. GRP pins held firm in brick and AAC, not one snapped even hitting them hard. The short zone meant install was brilliant, perfect flush finish every time. Saved hours of faffing.
gay
26.10.2017
Alright, but a lot of *faff* getting them seated right. Brill delivery, can't fault that. Easy drilling, the short expansion zone was a godsend on the concrete block. But getting the washer truly flush was **Rubbish!** Took so much mucking about, tapping and re-tapping to stop the minor dishing. We had to use way more fixings on the corner zones than quoted (4/m²) wasn't enough so ran short on the 90s quick. OK for the EPS, but feel it's slightly overpriced for the installation hassle. Could be better.
paul
10.10.2017
Needed a quick hammer-fix for the EPS into AAC, and these were spot on. The short zone cut down drilling no end. GRP pin is mint, zero thermal issue. Absolutely solid fit, every single one seated flush.
Tryfon
21.09.2017
Rock solid hold on my Cat A concrete and they worked perfectly for the AAC blocks too (E-cat). The short expansion zone saved serious time and strain on the drilling front. Not one snapped pin, the glass-fibre pins are seriously tough, and every single fixing seated dead flush. That, and I had a quick call back from a tech expert to double check my fix calulation for an exposed elevation, which gave me total confidence. Good price, perfect performance. Spot on kit.
Adam
20.09.2017
Absolutely spot on.
Kevin
16.09.2017
Brill fixings, short expansion zone saved drillig effort. Holds secure in AAC.
John
14.09.2017
Hammered straight in. Stout pins. Decent kit for the ETICS job.
Shorvon
01.08.2017
Rock solid, minimal heat loss. Brill!
Kristofer
25.05.2017
driver was smoking instead of packing the van. Rubbish fixings failed the AAC pull-out test.
Shane
12.04.2017
Stuck right to the desnity guide, the fix is rock solid. Easy hammer-in, and the GFRP pin went straight in with no fuss. Sits perfectly flush. Brill kit!
graham
16.02.2017
Cracking fixings. Sits nice & flush for the skim.
Daniel
31.01.2017
Slid EPS fix. Short zone drills quick for speed. Low thermal bridge but needs longevity data.
Daniyal
30.01.2017
pin too soft. Stripped immediately in AAC. Right pig to fit, wasting hours.
Tina
29.01.2017
Spot on for EPS/EWI. Short anchor zone worked a treat. Needed a firm thwack; plastic feels *less robust*.
Tomas
18.12.2016
RUBBISH. head snapped off every time i tried to knock it home. waste of my bleedin time.
Adam
08.11.2016
★★★★★ 5/5
### Proper Job Fixings - Fast Install & Solved Our Uplift Issue
Brilliant bit of kit, seriously good. Anchor worked perfectly on the solid concrete (Category A) and the install was a doddle. The **short expansion zone** cut down the drilling effort significantly, saved my energy on the scaffold.
This product finally fixed a recurring wind uplift issue—they feel **rock solid** even where I doubled up the density on the corners.
The **glass-fibre pin** didn't snap once while giving it some welly, and the innovative sleeve kept every washer perfectly flush, spot on for rendering later. The 90mm size was exact for the EPS boards. Seamless from ordering to site too, the driver was helpful and customer service gave excellent advice. I will not use anything else now.
