Brick Slips are very simple to apply and can be installed by inexperienced individuals through easy-to-follow steps.

You must measure the surface area you want to cover and purchase the appropriate quantities of Brick Slips, Brick Slip Adhesive/Grout and any additional extras, including EWI-260 Levelling Compound and a suitable EWI Pro Primer.  The tools required are:

• A 4-6mm notched trowel.
• A sharp pair of scissors to cut the Brick Slips.
• A 10mm brush for grouting.

Brick Slips can be applied to almost any substrate as long as the surface can take adhesive and is flat and level. The substrate can be levelled using EWI-260 Levelling Mortar and primed using a suitable EWI Pro Primer to ensure maximum adhesion.

The pigments used in the Brick Slip production process are all UV resistant, meaning they won't fade over time when exposed to sunlight. In addition to being UV resistant, our Brick Slips are impact-resistant, water-repellent, and vapour permeable.

To ensure a long-lasting life span of your Brick Slips, it is essential to prepare the substrate correctly, making sure the surface is flat and that it has been primed with a suitable primer. When installing the Brick Slips, ensure the adhesive/grout is 2mm thick and that the Brick Slip is firmly in place. Additionally, you must completely protect the Brick Slip system from the elements for a minimum of 3 days after installation (The time required depends on the temperature and air humidity).