Silicone Paint Premium Bio (EWI-006) – 15 Litre

From £124.18 Excl. VAT

  • Vapour permeable
  • Water resistant
  • Actively resists dirt and organic growth
  • Available in wide range of colours

 

Clear
x
SKU: EWI-006-15A

EWI-006 Silicone Paint Premium Bio

Premium Bio Silicone Paint is a high performance, breathable paint, suitable for use internally and externally. Premium Bio Silicone Paint will actively resist organic growth and dirt, which makes it ideal for areas with a high level of surrounding vegetation such as forests and parks. This paint can also be used as the finishing topcoat in the EWI Pro heritage system, as its breathability works well in conjunction with the breathable lime render.

Preparation

Before application, the surface of the substrate must be clean and dry. Surfaces that are not intended for painting must be adequately protected. Check that the Silicone Paint is the requested colour. Mix Silicone Paint thoroughly within its container to ensure an even distribution of colour pigments. When using more than one tin of paint for the same surface, ensure that the batch numbers are matched.

Application

Apply the masonry paint using brushes, rollers or spray equipment. Best practice when using a silicone-based paint is to apply the paint to the substrate in a continuous manner one wall/surface at a time. This will ensure that there are no visible drying lines where sections of paint meet. When used as a topcoat to our Mineral Render system, the masonry paint should be applied 3-7 days after rendering and at the latest 21 days after rendering, depending on weather conditions. When painting over the top of multi-layer render coats, the last layer must be 7 days old.

Paints with intense colours (reflection coefficient Y < 20%) should not be used for large facades; the resulting temperature and UV radiation in these conditions may reduce the durability of paint coats and may cause colour fading.

Silicone Render Premium Bio Conditions

  • Application temperature (air, substrate, materials): from +5°C to +25°C
  • Number of coats required: 1
  • Drying time: approx. 12 hours at +20°C
  • Quantity to be used for single coats: about 150-250 ml/m² (depending on the absorptive capacity, substrate structure and application method)

Silicone Render Premium Bio Storage Conditions

Shelf life: up to 12 months from the date of manufacture. Keep dry and in the original packaging at a temperature of +5°C to +25°C.

Reviews

There are no reviews yet.

Be the first to review “Silicone Paint Premium Bio (EWI-006) – 15 Litre”

Your email address will not be published. Required fields are marked *

You may also like…