48 x UltraFloor Level IT Super Flex 30 – 20kg

£1,468.80 (incl VAT)
  • 2-10mm thickness
  • Rapid setting (30 mins)
  • Suitable onto a variety of substrates
  • Easy to apply
  • Two-component product (powder & liquid)

This product is sold in pallets of 48 bags. 

UltraFloor Level IT Super Flex 30

UltraFloor Level IT Super Flex 30 is a rapid setting, rapid drying, fibre-reinforced self-levelling compound. This is a two-component system consisting of a dry-mix blend of cement, microfibres, graded fillers and additives, and a pre-gauged polymer liquid. UltraFloor Level IT Super Flex 30 can be applied a thickness ranging from 2-10mm, and is specifically designed for use on a wide variety of substrates. This product offers a very fast setting time and is therefore safe for foot traffic after just 30 minutes and floor coverings after an hour.


All surfaces should be dry and in a sound and stable condition, free from dust, contaminants and anything that may prevent adhesion. Very smooth surfaces should be made rough to provide a mechanical key to aid adhesion. It is recommended that a primer is applied prior to the UltraFloor Level IT Super Flex to ensure that a bond is achieved. Once the primer has dried, shake the pre-gauged bottle of liquid prior to opening, then pour the entire contents of the liquid into an oversized bucket (20 litres+ capacity). Gradually add the powder whilst continually mixing using an electric paddle mix. Once all of the powder has been added, keep mixing for 2 minutes until an even consistency is achieved.


Pour the UltraFloor Level IT Super Flex onto the floor and spread it using the smooth edge of a steel trowel. A spiked roller can then be used while the product is still wet to further distribute it and improve the finish. This particular self-levelling compound has limited workability due to its fast setting time and therefore work should be carried out as quickly as possible. For further information about the application process, please see the UltraFloor Level IT Super Flex datasheet.

Application conditions

  • Application temperature (air, substrate, materials): from +5°C to +25°C
  • Time of usability after mixing with water: approx. 2-10 mins (temp. +20°C)
  • Thickness of application: 2-10mm
  • Suitable for treading after 30 mins
  • Sold by the pallet


This product comes in two parts as a 20kg dry-mix bag and a 5-litre bottle.

Store in a cool, dry place. Avoid ingress of water. Shelf life: up to 12 months from the date of manufacture.


Write a review

There are no reviews yet.

Browse product categories