EWI-076 Premium Bio Silicone Render 25kg

£84.49 (incl VAT)

Out of stock

Share this

EWI-076 Premium Bio Silicone Render is the most advanced, high quality render in the EWI Pro catalogue. Not only is it extremely flexible and breathable, it also actively breaks down any signs of organic growth. It is therefore perfect for places where there is a high risk of organic discolouration.

About Premium Bio Silicone Render

EWI-076 Premium Bio Silicone Render is the most progressive render in the EWI Pro catalogue, offering end-users with an advanced range of advantages and benefits. What really sets this render apart is its ability to actively break down any sign of organic growth that occurs on the render surface. Premium Bio Silicone offers an enhanced level of impact resistance, especially when used with a fibreglass mesh-reinforced basecoat layer. It also offers increased resistance to UV rays, which means that the coloured render will not fade over time; even the brightest of colours will stay vibrant for years to come!

As it is a silicone-based thin coat render, Premium Bio is highly breathable and vapour permeable; therefore ideal for Mineral Wool and Wood Fibre systems which also offer breathability. Premium Bio Silicone Render is incredibly flexible, robust and long-lasting – it is the premium choice when it comes to coloured render.

It is also available in hundreds of different colours, so every design preference can be catered for.

  • Weatherproof
  • Advanced resistance to algae and plant growth
  • Frost-proof
  • Hydrophobic
  • Vapour-permeable
  • Self-cleaning
  • UV protection
  • Impact resistance

EWI-076 Premium Bio Silicone Render is a ready-to-use render suitable for use on brick, concrete, traditional plasters, gypsum substrates and chipboard. The render is a mixture of silicone and acrylic resins, with mineral fillers and pigments.

This product does not contain ammonia or organic solvents.

It is suitable for interior and exterior surfaces.

Applying Premium Bio Silicone Render

Premium Bio Silicone render comes as a ready-to-use mix so you don’t need to add anything to it before use. It is advisable that you stir the mixture first to ensure that all the colour pigments are evenly distributed throughout.

To create an even, textured finish you will then need to rub up the surface of the of the render using circular motions with a plastic render float.

You will need to ensure that you have enough people on site to be able to apply the render to an entire wall at once. If you attempt to apply the render section by section, then you will find that when it dries there will be a scarring effect where the different render sections meet.

Application Conditions for Premium Bio Silicone Render

Substrate primers: EWI-333 SiSi Render Primer

Application and setting temperature (air, substrate, materials): from +5°C to +25°C

Grain size distribution: 1mm, 1.5mm, 2mm and 3 mm

Caution: In case of wall thermal insulation systems, when plastering facades with a large area, it is recommended that colours with brightness coefficient (dispersed reflection) of at least 25% should be used. These coefficients are shown in the colour palette of EWIPro plasters and paints.

Coverage Rates of Premium Bio Silicone Render

EWI-076 Premium Bio Silicone Render is available in four grain sizes. Coverage is as follows:

  • 1.0mm – 1.9kg/m2. One bucket should cover 12 – 13 m2
  • 1.5mm – 2.4kg/m2. One bucket should cover 9 – 10 m2
  • 2.0mm – 3.4kg/m2. One bucket should cover 6-8m2
  • 3.0mm – 5.0kg/m2. One bucket should cover 5-6m2

Technical Specifications

  • Composition: based on water dispersion of silicone and acrylic resins with mineral fillers and pigments.
  • Bulk density: approx. 1.84 g/cm3
  • Relative diffusion resistance (non-trowelled 3 mm thick layer): ≤ 0.13 m
  • Water absorption after 10 hours: ≤ 360 g/m²

Clean-up

Do not dispose of Premium Bio Silicone Render along with household rubbish. Ensure that Premium Bio Silicone Render packaging is clean and empty before disposal. Leftover product should be not be allowed to reach sewage or watercourse systems.

Safety Measures for Premium Bio Silicone Render

  • Wear protective clothing during use.
  • Avoid contact with eyes.
  • Avoid contact with skin for extended periods of time.
  • Always ensure that water and/or washing facilities are available on site.

Packaging

Comes ready-to-use in a 25kg plastic tub.

Storage Conditions

Store in a cool, dry place. Shelf life: up to 12 months from the date of manufacture.

SKU: EWI-076-1.5A

Reviews

Write a review

There are no reviews yet.

Browse product categories