Metal Pin Hammer Fixing

5.00 out of 5 based on 1 customer rating
(1 customer review)

In stock (can be backordered)

Clear
Share this

Our metal pin mechanical fixings – coming in 5 sizes – are ideal for professional installation of the insulating boards onto the substrate. Made from plastic bodies and metal rods, they reduce thermal bridging to a minimum, ensuring that the system stays as effective as possible, however since the rod is metal they provide a huge amount of strength (metal pin fixings are suitable to support our mineral wool insulation systems).

  • Choice of 5 lengths
  • 115mm, 135mm, 155mm, 175mm & 195mm
  • Plastic fixing with Metal rod
  • Reduces thermal bridging

EWI-730 Metal Mechanical Fixings (metal pin, plastic body) come in a choice of five lengths, allowing them to be used on a variety of thicknesses of insulation. The metal mechanical fixing is made from a metal pin with plastic bodies, which means that they reduce thermal bridging within the system. The metallic rods are hammered in, which gives the system stability.

The metal pin mechanical fixings are available in the following lengths:

  • 115mm
  • 135mm
  • 155mm
  • 175mm
  • 195mm

The metal core is 8mm wide.

Intended Uses

The metal mechanical fixing is used to fix the insulating boards to the substrates. With a metal rod and plastic body, they keep thermal bridging down to a minimum, which means that the system maintains its insulating qualities.

These mechanical fixings are suitable for concrete, brick and other blockwork. If in doubt about the suitability of the substrate it is recommended a pull test is carried out to ensure it is strong enough to support an EWI system.

SKU: EWI-730-155
Weight 2 kg
Length

155mm, 195mm, 115mm, 135mm, 175mm

1 review for Metal Pin Hammer Fixing

5.00 out of 5
Write a review

  1. Rated 5 out of 5

    Decent fixings, strong and work well.

Browse product categories