Out of stock
Silicone K1 K-rend scratch render is a water repellent, cement based, polymer modified, self-coloured render, requiring only the addition of water and 10 minutes mixing time. If applied as per manufacturer’s instructions, Silicone K1 Monocouche render will provide an attractive, low maintenance finish.
Silicone K1 is designed for use with most spray machines
Store in a dry environment where possible and minimise contact with moisture.
Keep out of reach of children.
Packed materials should be stored in unopened bags, pallets should remain wrapped and stored in a stable manner in an appropriate storage area.
Silicone K1 is specifically designed to incorporate the benefits of silicone water repellents into a cement-based render system.
Silicone adds a high water repellent quality, while allowing water vapour to pass freely through the render; thus the amount of dirt adhering to the surface is greatly reduced, ensuring a freshly rendered appearance for a prolonged period of time. This dry surface also improves the resistance of the finished render to algae growth and the natural phenomenon of lime-bloom.
One Coat Coverage:
1.6 kg / mm thick / sq m
One Coat Require:
26 – 32kg / sq m approx. Nominal 16 – 20mm thickness
Silicone K1 is normally applied in two passes depending on background conditions and final finish required. It is important that a consistent minimum finished thickness is achieved over the whole surface and that the maximum recommended thicknesses are not exceeded.
Arran, Cinnamon, Fintry Stone, Green, Pewter grey, Polar White, Powder Blue, Salmon Pink, Sterling White, Stone, Buttermilk, Champagne, Cream, Grey, Ivory, Oatmeal, Sandstone, Terracotta, White, York
There are no reviews yet.