EPS Adhesive (EWI-210) - 25kg

EPS Adhesive (EWI-210) – 25kg

Brand:EWI Pro

Rated 5.00 out of 5

(1 customer review)

£12.52 Excl. VAT

946 in stock


EWI-210 EPS Adhesive is used for mounting EPS boards onto substrates as part of external wall insulation systems. It is a quick-drying, strong adhesive that contains reinforcing fibres for added strength and flexibility. 

  • Waterproof
  • Frost-proof
  • High grip
  • Vapour permeable

Please note: this product is not intended for use as a basecoat.

SKU: EWI-210

EWI-210 EPS Adhesive 

Our EWI-210 EPS Adhesive is designed to attach the expanded polystyrene (EPS) boards to the underlying substrate. The EPS Adhesive is highly versatile, as it can be applied on various types of mineral groundworks including: concrete, cement-lime, ceramic, silicate, autoclaved aerated concrete, and more.

Please note that this product is not intended for use in the basecoat reinforcement layer. We recommend using EWI-220 EPS Basecoat or EWI-225 Premium Basecoat.


EWI-210 comes in powder form in 25kg bags. It is therefore a dry mix and needs to be combined with clean, cold water (6.3 litres) prior to use. We suggest using a large bucket and adding the water prior to the EPS Adhesive. Once the EPS Adhesive has been added to the water, mix the product using a paddle mix until an even-consistency mortar is produced.

Before application and after the initial mixing of the EPS Adhesive, leave the bucket for 5-10 minutes and then remix using a paddle mix.


The EWI-210 EPS Adhesive can be applied in two ways: either to the whole surface of the EPS board using a notched trowel, or around the perimeter of the insulation board with 3 dabs across the middle.

Normally the notched trowel method is used when you are mounting the insulation boards onto new block-work or a very flat surface. Applying EWI-210 to the perimeter of the board is recommended when the wall is not flat, as the adhesive can absorb some of the irregularities.

Application Conditions 

  • Substrate primer: EWI- 301 or EWI-310 if a key is required.
  • Application temperature (air, substrate, materials): from +5°C to +25°C
  • Water mix proportions: approx. 6.3 l of water per 25 kg of dry mix
  • Time of usability after mixing with water: approx. 2 hours (temp. +20°C)
  • Quantity to be used: approx. 4-5 kg/m2

Storage Conditions

Comes in powder form in a 25kg paper bag. Store in a cool, dry place. Avoid ingress of water.

Weight 25 kg

1 review for EPS Adhesive (EWI-210) – 25kg

  1. Rated 5 out of 5


    i didnt no ewi pro do a universal adhesive a for sticking mesh as one products. so far i used the weber multi and sto adhesive. quality wise they are the same. pricing wise it is good also

Add a review

Your email address will not be published. Required fields are marked *

You may also like…

  • £16.70 Excl. VAT
  • £68.74 Excl. VAT