Elastolith Brick Slips Malta
Our Elastolith brick slips perfectly mimics the appearance of brickwork. Flexible and durable, these are perfect if you want to recreate brick features internally or externally. The brick slips are very lightweight and are incredibly easy to install. Also, making them great for installing on top of external wall insulation systems.
Above all, the simplicity of this brick slip solution is one of its most best selling points. The Elastolith Brick Slip system has only two components – the brick slip itself and the adhesive, which also acts as the grout. The brick slips come in a wide range of colours and textures. In addition, we offer the adhesive in 4 different colours. So, you can easily choose the perfect combination of brick slip and grout to match your requirements.
Further, the bricks slips by Elastolith are nearly entirely mineral-based and consist of a mixture of assorted quartz sands and a binding agent. The binding agent is a high-grade polymer dispersion and serves the role of clay in traditional brick.
All the pigments used in the brick slips are resistant to UV, meaning that they won’t fade over time when exposed to sunlight. Also, ensuring that your facade looks as good 20 years later as it did the first day installed. Our Elastolith systems are incredibly impact-resistant, water repellent, and vapour permeable.
Use a notched trowel (4 mm) to spread the special brick slip adhesive to approximately 1sq.metre area. Used to embed the brick slips, you should also aim to have a layer of adhesive approximately 2mm thick. Then, fix the brick slips to the wall in a staggered formation (like standard brickwork) with a 10mm gap between vertical and horizontal bricks. In addition, bent around corners easily and flexible with minimal fuss. Sharp pair of scissors cuts easily through too. After that, once the bricks are all installed, a 10mm brush can be used to ‘grout’ the brickwork. Ideally, wet the brush slightly and brush the grout to smooth it out. In addition, bent around corners easily and flexible with minimal fuss. Sharp pair of scissors cuts easily through too.
- Approx. 48 brick slips per m²
- The brick slips are found in 7 different colours (the adhesive is then present in a further 4 colours)
- Easy to install
- Bent around corners easily and flexible
- Sharp pair of scissors cuts easily