ETICS Gold contains Nanotechnology which penetrates and lifts dirt and soiling, removing topcoat and base coat where spills have raised whilst rendering external walls. Our formula uses nano-energy cells which penetrate the spillage and actively lift away the layers of the stain from surfaces one by one.
Wet the area and manually remove large, loose spillages with a jet wash and brush.
Always make sure the newly finished walls are protected with plastic sheeting at least 12m high.
Use the jet wash to apply the ETICS Pure Gold over the entire affected area.
Leave for 10-20 minutes.
Re-apply water and cleaner to remove tough stains.
Once all the stains have been removed, wash the area with clean water to remove any remaining render cleaner.
Scrape away the worst of the debris from the affected area. Any loose chunks should be removed with a wire brush or a soft brush for windows and doors.
Apply the ETICS Gold to horizontal surfaces and allow to soak in for 10-20 mins. Keep wet with additional cleaner.
Using a brush or cloth, gently scrub the surface. For hard to treat areas, add a small amount of water.
For hard to treat, stubborn stains repeat the process and leave the render cleaner on for a further 20 minutes, again keeping it wet.
Once happy with a clean surface, wash away any leftover render cleaner with clean water.
There are no reviews yet.