Our Coloured Render Tester Pots are available purely as a means of testing the colours of our renders before purchase. They are available in 250 ml pots and in a default grain size of 1.5mm.
This Coloured Render Tester pot contains 250ml worth of the 1.5mm thin coat render residue pre-mixed in the colour selected. Please note: this is a tester pot and should be used only to test the actual render colour on a small area of the property. The render needs to dry and set (48-72hours at least) to represent the actual colour. Do not form the judgement of the colour when the product has just been applied.
Tester pot contains a sample of the Silicone Silicate Coloured Render render, approx 250ml worth. Does not contain ammonia or organic solvents.
This Coloured Render Tester Pot is available for your use as a colour tester.
It is suitable for interior and exterior surfaces.
Composition: based on water dispersion of silicone resins with mineral fillers and pigments.
Bulk density: approx. 1.84 g/cm3
Relative diffusion resistance (non-trowelled 3 mm thick layer): ≤ 0.13 m
Water absorption after 10 hours: ≤ 360 g/m²
Application and setting temperature (air, substrate, materials): from +5°C to +25°C. Ensure the walls are clean and free from debris. Avoid applying on dusty or wet surfaces.
Grain size of sample pot: 1.5mm. Note: if you are going with 1.0mm or 2.0mm grain size, then the final colour may turn out to be lighter or darker due to the shading factors hitting the grains. The pigments within the coloured buckets will always be consistent.
Colours: selected colour range in the drop-down menu. Colour samples also available in the EWI Pro Insulation Systems colour chart.
Pure White, Linen, Antique White, Granite, Pearl, Ivory, Magnolia, Honey, Eggshell, Silver, Wheat, Smoke, Ash, Blush, Lemonade, Peppermint, Mist, Elderflower, Wisteria, Ice, Copenhagen, Rust, Sandstone, Rose Gold, Bitter Lemon, Opal, Almond, Orchid, Rosewater, Celadon, Sherbert Lemon, Platinum
There are no reviews yet.