4.8 out of 5 Stars on TrustPilot
MARCH SALE - UP TO 50% OFF

Replacing Pebbledash with Coloured Render

Pebbledash is perceived by many as an outdated look for a property; it was frequently used during the post-WW1 housing crisis as a means of covering up quickly-built, slap-dash properties. If you live in the UK, you are most likely to have come across a pebbledash building. While it may be a durable building method, it’s certainly an acquired taste.

What is pebbledash?

The pebbledash effect is created by applying a layer of mortar (usually sand and cement) to an external wall and throwing pebbles at the wall. Pebbledash houses are still dotted all over towns and cities in the UK and can often have a somewhat dilapidated look. Over time, the pebbles can drop from the wall, leaving the mortar exposed to the weather and therefore vulnerable to absorbing water and causing damp issues. Also, due to its unpopularity, pebbledash can reduce the value of a property purely for its lack of aesthetic appeal. The preferred choice due to aesthetic reasons is now coloured render. Our coloured renders can be customised to absolutely any colour of your choice and can be ordered online or over the phone!

(Existing property with pebbledash)

How can I replace pebbledash with a coloured render?

While we’re not hating on pebbledash (much), you might want to consider re-rendering your property, whether you’re moving into a new home, updating the look of your current property or both. However, as one of our frequently asked questions here at EWI Store, we recognise that there is a knowledge gap on how to apply render on top of pebbledash. That’s why we’ve made this blog – to tackle the question for all you pebbledash homeowners!

The short answer is that, unfortunately, you cannot replace pebbledash with coloured render by applying coloured render directly on top of the pebbledash. Saying that, there are several ways around it that you may wish to consider.

Will you choose to remove, OCDC, or insulate & render:

Option 1: Remove

The first option is to attempt to remove the pebbledash by hacking it off. However, the main downfalls to this option are that the brick underneath is at risk of being damaged, and there is no guarantee that you will achieve a smooth finish. If this is the best or only option for you, be very careful about who you hire to tackle the task; make sure they are experienced in removing pebbledash. If your pebbledash is forcibly removed, this can seriously damage the underlying wall and invalidate your house insurance. It’s also important to note that, even after all this, you still wouldn’t be free to apply coloured render directly on the wall. Building regulations stipulate that if you strip it right back to the original brick, you’ll need to insulate before rendering with a coloured render.

Option 2: One Coat Dash Cover (OCDC)

The second option is to use the One Dash Coat Cover (OCDC) to completely smooth over and cover up the pebbledash to achieve a clean slate. This product is specifically designed to be applied on top of pebbledash, and it can then be painted or rendered to achieve a modern appearance. The good thing about the OCDC is that it is breathable, so it will allow any trapped moisture within the underlying pebbledash to escape. It can also be applied up to 20mm in one pass (up to a maximum of 50mm), so it’s guaranteed to smooth over the pebbledash nicely! Check out our case study on an OCDC project.

  • SALE OCDC EWI-065
    Quick View

    One Coat Dash Cover (OCDC) (EWI-065) – 25kg

    £13.45 Excl. VAT£17.66 Excl. VAT

Option 3: Insulate then render

A beneficial way of eliminating the pebbledash look is by installing 20mm (or thicker, but the thicker you go, the more expensive) external wall insulation (EWI) boards over the top of your pebbledash. This is a great option because the EWI will give you added insulation, which can save you money on bills in the long run.

By installing EWI boards, you will also save time and money because hacking off the pebbledash won’t be necessary. Instead, you can simply secure insulation boards over the top of the pebbledash using adhesive and mechanical fixings. Once you have done this, you can apply the render of your choice on top of the insulation boards and achieve a far more pleasing outcome.

Which coloured render can I use to replace my pebbledash?

There are so many options for replacing your pebbledash with coloured render that it can be quite overwhelming. We want to give you a clear idea of what each coloured render can offer so that you can make the right choice to suit the needs of your property and your personal taste.

Thin Coat Coloured Renders to Replace Pebbledash

Thin coat renders are a great option for when removing your pebbledash and replacing it with coloured render. Because they are thin-coat, they offer a level of flexibility that ensures that your coloured render finish stays crack-proof for years to come. Thin coat coloured renders are also highly breathable, so they will help to prevent problems with damp and mould on your walls.

They also come in different grain sizes, which determines the textural finish that the coloured render will offer you – the bigger the grain size, the more textured the finish that you’ll achieve. If you have simply removed your pebbledash, then you may want to go for a larger grain size as this makes any imperfections in the basecoat less noticeable. Read our blog Coloured Render Cost Per M2 for an idea of pricing!

There are three options that you can choose for thin coat coloured renders:

  • Silicone render/Silicone Silicate render: Silicone Coloured Render is a premium, modern technology coloured render – which is available in hundreds of different colours. Silicone is a very popular choice because it offers hydrophobic properties – which means that it repels water, dirt and organic growth – so it probably requires about the same maintenance as pebbledash (very little). Silicone render is also super easy to apply because it comes ready to use, so you just apply it straight out the pot. (Read more about Silicone Render here).
  • Acrylic render: Acrylic Coloured render is very similar to silicone, except that it doesn’t provide the same hydrophobic properties. It’s a solid middle-ground thin coat render because it still provides the same flexibility, but it’s also great at holding onto colour pigment. This is a fantastic choice if you are looking to replace pebbledash with a coloured render. (Read more about Acrylic Render here).
  • Mineral render: Mineral Coloured render is a dry-mix, thin coat render. This is a very popular choice if you live in a cold or rainy climate (as many pebbledash homeowners do – Scotland, coastal homes!) because mineral render is extremely fast drying; you can’t apply other renders in cold/rainy temperatures because they take longer to dry. The only thing about this render is that you need to paint it afterwards with silicone paint to seal it in. This is because, if it’s left exposed to the elements, it can develop lime bloom due to the presence of Portland cement. (Read more about Mineral Render here)
  • Silicone Render (EWI-075) – 25KG

    From £70.65 Excl. VAT
  • Nano Drex Silicone Render (EWI-077) 25kg

    From £128.49 Excl. VAT
  • Acrylic Render (EWI-010) – 25kg

    From £46.92 Excl. VAT
  • SALE Mineral Render EWI-060
    Quick View

    Mineral Render (EWI-060) – 25kg

    £27.00 Excl. VAT£32.09 Excl. VAT

Thick Coat Coloured Renders to Replace Pebbledash

Thick coat renders are far more traditional but, as the name suggests, they do lack flexibility and breathability because they are applied in a much thicker layer. Once you’ve removed your pebbledash, you can use our Monocouche Scratch Render. Note: thick coat renders aren’t suitable for application on top of insulation boards.

  • Monocouche scratch render: Monocouche scratch render is a thick coat, through-coloured render. It is more traditional, but does require extra work to install it. This is because the Monocouche needs to be applied in two passes for extra strength and cannot be applied in wet or humid conditions. Monocouche render then needs fibreglass mesh embedded within it to provide extra strength and flexibility (which means it will resist cracking) and then, once dried, it needs scratching back to achieve the desired texture. Read our blog Monocouche Scratch Render Cost Per M2 for an idea of pricing!
  • monocouche render cotton
    Quick View

    Monocouche Render (EWI-090) 25KG x 40 Cotton White

    £399.60 Excl. VAT

To conclude…

If you are a pebbledash homeowner, looking to re-render, or potentially even install EWI, then we have everything you will need. Check out our materials calculator or get in touch with us directly and we can point you in the direction of one of our fantastic approved installers!






    I would like to receive news and offers from EWI Store
    Please prove you are human by selecting the tree.

    Are you a fan of Pebbledash? Leave a comment below…

    Let’s debate: pebbledash or no pebbledash? Leave a comment below with your opinion; is pebbledash outdated and ugly, or is it a relic from our past that we should preserve for traditional purposes?

    Facebook
    Twitter
    LinkedIn

    9 thoughts on “Replacing Pebbledash with Coloured Render

    1. have been lookign for a solution to getting rid of my pebbledash but the builder said it would be too damaging to remove it. I will mention this to him and see what he thinks!

    2. My local council says if i re-render the whole wall i have to fit insulation first.
      True or not?
      After ‘Grenfell’ i don’t trust the fireproof status of this insulation.

      1. True if you strip off the render back to the original brick you have to then insulate. Two options here if you are worried about fire risk – one: use mineral wool slab insulation, which is A1 class rated for fire with render or option 2, if existing substrate is ok you can overcoat with our lightweight basecoat then render on top. Option 2 involves no insulation just cement, plaster and lime. Hope this helps.

        1. Hi Nicholas, I’m about to put insulation on one wall of the house (gable end) as we are on the corner. The rest of the house is pebble dash. If I understand correctly we could apply the lightweight base coat to 2 walls (over the existing pebbledash) and have the same render on all three walls i.e. The newly insulated wall and 2 old pebble dashed walls. Would that be right?

      2. How can I go over pebbledash that has been done over insulation board’s ex council house that has been super rapped 20 year’s ago

        1. Hi there, you could possibly use our One Coat Dash Cover product or a a similar basecoat that we offer that needs to be installed with a fibreglass mesh and pinned back into the substrate using special fixings. Then the basecoat can be primed and coated with a coloured through Silicone finish. Hope this helps.

    3. I live in Scotland and I love pebble dash, or Harling as we call it here. It lasts forever but I admit that after about 50 years it begins to look dull. I’m keen to have our refreshed, with the same finish but reading this article, it looks like it’s not a viable proposition. Shame

    4. We removed the pebbledash on our house. BIG MISTAKE!!! Took all the front of the bricks off, but now covered with a sm0oth render finish, but not sure how much damage we have done to the structural integrity of the house!

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    Read more here!